Two lifting cables outside material flow

Reduced dust emission during loading operation

Weather-proof, durable, highly abrasion and temperature-resistant flexible neoprene chute

BELLOJET ZA Loading Spouts are used for efficient, dust-controlled loading of dry, dusty bulk solids into tankers. The spouts are provided with inner tapered cones to contain the flow of material and an outer double bellows to provide for dust removal. At the lower end of the Loading Bellows, a SINT engineering polymer-coated cone with special sealing properties is provided for connection to the tanker.

Function

First the Loading Spout is lowered from stand-by position towards the inlet spout of the tanker. As soon as the spouts outlet cone settles on the inlet spout of the tanker, the slack cable switch mounted outside the transmission box stops lowering of the spouts. The limit switch inside the transmission box stops both full extension and contraction of the spouts. Material loading is started by opening the silo outlet valve.
During filling of the tanker, the polymer coating of the outlet cone acts as a perfect dust seal. At the same time the filter fan continuously sucks dust through the external spouts into the integrated filter cartridges in the upper section of the unit exhausting excess air. A slack cable switch activates further extension of the spouts as the tanker lowers under the increasing material weight. A level monitoring device installed in the centre of the outlet cone signals maximum material level in the tanker compartment and orders immediate closing of the silo outlet valve. Contraction of the spouts back to stand-by position starts after a delay of approximately ten seconds in order to allow the filter to evacuate the remaining dust. Once the spouts is fully contracted, the cable limit switch inside the transmission box stops operation. The preset after shut-down cleaning cycle now provides for additional pulse-jet cleaning of the filter cartridges for another ten minutes.

Features

Inlet diameter: 300 mm (12 in)
Maximum throughput rate: 250 m³/h (147 cfm)
Operating temperature: -40 ~ 150 °C (-40 ~ 300 °F)
Filter surface: 10 m² (108 sq ft)

Benefits

Built-in dust filter reducing dust emission during loading operation
Flexible chute in Neoprene covered by Hypalon® makes the spout weather-proof, highly abrasion and temperature-resistant and durable
Reverse cone with inside level control indicates when tanker is full, gradually raises loading spouts improving material distribution inside the tanker
Two lifting cables outside the material flow raise and lower the loading spouts without any cable wear due to material friction and obstruction to material flow

Options

ATEX-version available
Various chute and fabrication materials available according to material handled
Control panel with remote control
Available with different types of level indicators
Outlet vibrator
Anti-spillage device (acts as dustproof stopper as loading spouts is being raised)

Multimedia

BELLOJET ZA Tanker Loading Bellows With Integrated Dust Collector - Media 1

BELLOJET ZA Tanker Loading Bellows With Integrated Dust Collector - Media 2

Download

Here below you will find all documents regarding this product. Click “Other Languages” for translated versions.

Select all

Language

Name

Issue

Latest edition

Code

Brochures

Language

Name

BELLOJET

Issue

Latest edition

01/2013

Code

Data Sheets

Language

Name

Datasheet Animal Feed Milling Equipment - ZA - ENG

Issue

Latest edition

12/2014

Code

Language

Name

Datasheet DryMix Building Materials Processing Plant Equipment - BELLOJET ZA - ENG

Issue

Latest edition

04/2015

Code

Language

Name

Datasheet Flour Milling Equipment - BELLOJET ZA - ENG

Issue

Latest edition

01/2015

Code

Language

Name

Datasheet Plastics Processing Plant Equipment - BELLOJET ZA - ENG

Issue

Latest edition

12/2014

Code

To download technical, and spare parts manuals, please log in with your username and password.

If you do not have an account, please click here to register.